Hot tubs and saunas

Plastic Hot-Tubs

Share with your friends!
Facebooktwittergoogle_pluspinterestmail

Plastic hot-tubs

Price Maintenance Standard setup

Plastic hot-tubs - a practical option

Plastic hot-tubs are for those who give priority to practicality. Plastic hot-tubs can be released of water and left empty whenever you want because plastic is resistant to rot and fungus. So, this tube is a great alternative for those who do not want or do not have enough time to care for the hot-tub, if you are ready to invest a bit more money, that is, because plastic hot-tubs are more expensive than wooden ones. In essence, plastic hot-tubs are no different on the outside from a wooden hot-tubs, but inside it has a plastic shell that ensures tightness of the whole construction and provides a much simpler maintenance experience. After a bath, drain the water and forget about the hot-tub until next time. Plastic hot-tubs are easy to maintain because they require no scrubbing. Contrary to wooden hot-tubs, plastic hot-tub's shell won't dry out or obtain water, which in a long run can become leaky.

You can also choose:

And yet, the flaw of these hot-tubs can be called the very feeling of bathing - it is different from the wooden hot-tubs. Also, if the hot-tub is used in the evening and then covered with the lid, in the morning the water in the wooden hot-tub would still be warm and shortly after lighting the furnace the bath is usable. While plastic hot-tubs usually cool much faster.

  • "PLASTIC" hot-tub 1.8m with fir wood decorationAdd to cart

    “PLASTIC” hot-tub 1.8m with fir wood decoration

    Price: 2,390

    Manufactured in 2-4 weeks

    1.5-2.5h ±180kg 2000-2500l  8

    Hot-tub with plastic casing and sun-shaped benches!

  • "PLASTIC" Hot-tub 2.0m with fir wood decorationAdd to cart

    “PLASTIC” Hot-tub 2.0m with fir wood decoration

    Price: 2,190

    Manufactured in 2-4 weeks

    1.5-2.5h ±180kg 2000-2500l  8

    Plastic hot-tub with fir wood decoration and air massage system!

  • "PLASTIC" hot-tub 2.0m with oak wood decorationAdd to cart

    “PLASTIC” hot-tub 2.0m with oak wood decoration

    Price: 2,890

    Manufactured in 2-4 weeks

    1.5-2.5h ±250kg 2500l  10

    Long lasting hot-tub – oak wood decoration and plastic benches inside!

  • Build yourself! "PLASTIC" hot-tub with wood finishAdd to cart

    Build yourself! “PLASTIC” hot-tub with wood finish

    Price: 871

    Manufactured in 2-4 weeks

    1.5-2.5h ±120-180kg 2000-2500l  4-12

    Build your desired plastic hot-tub!

  • Red Cedar "PLASTIC" hot-tub 1.8mAdd to cart

    Red Cedar “PLASTIC” hot-tub 1.8m

    Price: 4,890

    Manufactured in 2-4 weeks

    1.5-2.5h ±180kg 2000  6

    Special exterior and smell wooden hot-tub with plastic casing!

  • Thermowood hot-tub with plastic shell for 6 peopleAdd to cart

    Thermowood hot-tub with plastic shell for 6 people

    Price: 3,800

    Rated 5.00 out of 5
    Manufactured in 2-4 weeks

    1.5-2.5h ±180kg 2000-2500l  4-6

    Plastic hot-tub with very elegant thermowood decoration and staircase!

Price of plastic hot-tubs

The price of this product depends on the diameter of the tub, which can be from 1.5 to 2.2 m, and its own set (stoves, wood type, massage systems, etc.). The most optimal and best-selling is a 1.8-meter diameter tub with an inside top-loading furnace capable of accommodating up to six people. This is the optimal solution based on size and cost of a tub.

Maintenance of plastic hot-tubs

As stated before, maintenance of plastic hot-tubs is extremely easy. In the case of poor outdoor weather conditions, the inside plastic shell should be treated every 1-2 years. We advise to change the water inside the hot-tub every two weeks and often use special water disinfectants.

Standard setup of plastic hot-tubs

Standard setup of plastic hot-tubs is as follows:

  • hot-tub with windowsill and wooden benches;
  • a lid for the hot-tub;
  • inside or outside mounted fire-burning furnace;
  • poker for ash cleaning;
  • mini-ladder for climbing inside the hot-tub;
  • water stirring pole.
Why choose plastic hot-tubs?

First of all, it is recommended to choose plastic hot-tubs for those who like to sit with a larger company and want more than six people to fit, so they are great for rural tourism homesteads. Plastic tubs are not only tight and easy to maintain, but can simultaneously accommodate up to twelve people! Other advantages of the plastic hot-tubs:

  • Plastic hot-tubs are fairly lightweight, compact, and easy to move from one place to another.
  • When the plastic shell gets worn out it is easily replaceable, and the tub does not lose its integrity.
  • Plastic hot-tubs are made out of one of the most durable materials.

Showing all 6 results

  • "PLASTIC" hot-tub 1.8m with fir wood decorationAdd to cart

    “PLASTIC” hot-tub 1.8m with fir wood decoration

    Price: 2,390
    Manufactured in 2-4 weeks

    1.5-2.5h ±180kg 2000-2500l  8

    Hot-tub with plastic casing and sun-shaped benches!

  • "PLASTIC" Hot-tub 2.0m with fir wood decorationAdd to cart

    “PLASTIC” Hot-tub 2.0m with fir wood decoration

    Price: 2,190
    Manufactured in 2-4 weeks

    1.5-2.5h ±180kg 2000-2500l  8

    Plastic hot-tub with fir wood decoration and air massage system!

  • "PLASTIC" hot-tub 2.0m with oak wood decorationAdd to cart

    “PLASTIC” hot-tub 2.0m with oak wood decoration

    Price: 2,890
    Manufactured in 2-4 weeks

    1.5-2.5h ±250kg 2500l  10

    Long lasting hot-tub – oak wood decoration and plastic benches inside!

  • Build yourself! "PLASTIC" hot-tub with wood finishAdd to cart

    Build yourself! “PLASTIC” hot-tub with wood finish

    Price: 871
    Manufactured in 2-4 weeks

    1.5-2.5h ±120-180kg 2000-2500l  4-12

    Build your desired plastic hot-tub!

  • Red Cedar "PLASTIC" hot-tub 1.8mAdd to cart

    Red Cedar “PLASTIC” hot-tub 1.8m

    Price: 4,890
    Manufactured in 2-4 weeks

    1.5-2.5h ±180kg 2000  6

    Special exterior and smell wooden hot-tub with plastic casing!

  • Thermowood hot-tub with plastic shell for 6 peopleAdd to cart

    Thermowood hot-tub with plastic shell for 6 people

    Price: 3,800
    Rated 5.00 out of 5
    Manufactured in 2-4 weeks

    1.5-2.5h ±180kg 2000-2500l  4-6

    Plastic hot-tub with very elegant thermowood decoration and staircase!